Flowserve - ISC2-MW

Flowserve – ISC2-MW

Manufacturer

Flowserve

Based on the popular ISC2 pump seal platform, the ISC2-MW is designed with increased internal clearances that allow for greater run-out handling in top-entry mixer services, up to 0.045 of an inch. State-of-the-art thermal management reduces seal face temperatures and the internal volute groove promotes barrier fluid flow inside the seal.

ADDITIONAL INFORMATION

  • Size Range: 25 to 200 mm (1.000 to 8.000 in)

  • Pressure: Up to 6.9 bar (100 psi)

  • Temperature: -40 to 204C (400F)

  • Shaft Speed: Up to 1.1 m/s (3.5 fps)

  • Economical cartridge seal for top entry installations

  • Dual wet design

  • Thermal management technology helps the seal run cooler and tolerate dry running events

  • 1.14 mm (0.045 inch) TIR on sizes up to 89 mm (3.500 inch) shaft size

  • 1.52 mm (0.060 inch) TIR on sizes greater than 89 mm (3.500 inch) shaft size

  • Volute groove significantly increases barrier fluid flow to promote cool running even at mixer speeds

  • CHEMICALS: Basic (Organic & Inorganic) | Specialty (Fine & Consumer) | Biofuels | Pharmaceutical | Petrochemicals

  • WATER: Water Management | Waste Water | Agriculture & Irrigation | Flood Control System

  • OIL & GAS: Downstream Processing

  • GENERAL INDUSTRIES: Pulp & Paper | Mining | Steel & Primary Metals | Other Industries

Part# Description Configuration
FS-ISC2-MW Dual pressurized Mixer Seal ISC2-MW